PACKET CAPTURE TOOL FULL
PACKET CAPTURE TOOL PORTABLE
PACKET CAPTURE TOOL OFFLINE

High precision timestamp is recorded along with the packet. Supported output file formats are pcap (wireshark format), pcapng/ntar (next generation wireshark formats), hdl (GL proprietary format used by GL PacketScan™) and dat (GL proprietary format used to store captured data).The limit for capture is only the hard disk size. Continous capture can be accomplished for lower rate traffic, as the captured packets are transferred in real time to the host via USB 2.0, and stored on the hard disk.WireSpeed capture can be accomplished utilising the Onboard DDR2 memory size of 2GB.Capture on 1, 2 or 3 ports simultaneously at WireSpeed on either Electrical or Optical interface.The capture can either run continuously or be limited to a specified file size (MB), number of packets, or specified time duration. The captured packets are aggregated and stored temporarily on the 2 GB Onboard memory buffer, before being transferred to the host via the USB 2.0 interface at run time and stored on the host PC’s hard disk. The application allows continuous or limited capture of Ethernet packets using the 2 optical or electrical GigE ports. Now there is also a report generation capability for Record and Playback application. And the packets are sent out on the same port as they were captured. traffic is transmitted at the precise rate at which it was captured (by maintaining the recorded timestamps). This option allows user to precisely regenerate the traffic from a pre recorded file i.e.

PACKET CAPTURE TOOL FULL

In Continous Capture, the recording continues even after the Onboard buffer is full with discontinuous recording indication.Įnhanced Playback application now supports the ' As per File' option. In Lossless Capture, the recording stops automatically when the Onboard 2 GB buffer fills up. Recording has been enhanced with the option for limited Lossless Capture/Continous Capture. This new format supports important enhancements like nanosecond time resolution and interface information (like the captured port number). This is the new format used by Wireshark®. Support for PCAP-NG (Next generation pcap) format has been added. For both, the accuracy is maintained within 10s of nanoseconds. While playing back the file, the nanosecond timestamp recorded in the file is maintained for each packet. Now captured file will have the timestamp recorded in nanosecond precision. Timestamp precision for file capture/playback is increased from Microsecond to Nanosecond. Packet Mode allows user to edit MAC, VLAN (up to 3 levels), MPLS (up to 3 levels), IP and UDP/TCP headers and also the payload field. In Raw Mode, each bit anywhere within the packet can be set/reset for filtering. Raw Mode provides maximum flexibility in defining the filter, whereas Packet Mode provides user convenience to edit individual header fields. The enhanced Packet Filter feature provides two modes for editing filters - Raw Mode and Packet Mode. The Record to File application with the powerful ' WireSpeed Packet Filter' allows user to filter out unwanted traffic, and continuously capture the traffic of interest, and the limitation being only the hard disk size and the disk write speed. New optical SFP module Information display provides SFP information like Connector Type, Link Length, Tx Power, Rx Power, Status etc. PacketExpert™ with Record/ Playback also supports WireSpeed multi-port transmission (playback) of recorded traffic with high precision reproduction of the recorded timestamps.

PACKET CAPTURE TOOL OFFLINE

The application supports WireSpeed filtering and capturing on multiple ports and traffic aggregation (packets filtered from multiple ports are aggregated as a single stream and saved to hard disk for offline analysis). Each GigE port provides independent Ethernet/VLAN/MPLS/IP/UDP testing at WireSpeed for applications such as BERT, RFC 2544, IP Link Simulation and Loopback.Įnhanced PacketExpert™ with Record/ Playback application is designed for (optical or electrical interfaces for up to 1 Gb/s) high-precision

PACKET CAPTURE TOOL PORTABLE

PacketExpert™ is a portable (USB based) Quad Port Ethernet / VLAN / MPLS / IP / UDP Tester with 4 Electrical (10/100/1000 Mbps) and 2 Optical Ports (1000 Mbps).

Packet capture tool